Rotary Ash Cooler

1875550_meitu_1

Application: Bottom ash handling for CFB boilers thermal power plant.

1. Overview

GTL-n series rotary ash cooler is a new generation of cooling equipment for the circulating fluidized bed (CFB) boiler hot slag (around 1000℃). Its a most advanced and a very successful cooling technology. The drum use the new technology of composite cooling of inner ring spiral and screw pipe to make the heat dissipation much more efficient. The frequency converter of the transmission system can automatically adjust the output according to the change of the thickness of the bed layer.

2. Technical Specification

Parameter / Model	GTL-4	GTL-8	GTL-12
Capacity t/h	4	8	12
Max slag temperature in℃	1000	1000	1000
Max slag temperature out ℃	90	90	90
Water flow rate while with air t/h	4	5	6
Water flow rate while without air t/h	7	10	13
Inlet water pressure MPa	0.4	0.5	0.6
Motor kw	5.5	7.5	11
Diameter of inlet water pipe mm	65	65	65
Diameter of outlet air pipe mm	150	150	150
Quality of cooling water	Softened water or industrial water

All above can be customized according to your technical requirement.

3. Installation and operation

The rotary ash cooler is transported by whole body and without disassembly. After you receive it you can start installation immediately.

According to the main drawing of the rotary ash cooler, put the ash cooler on the embedded iron.(as below drawing) After the fixed position, weld the base with the embedded iron together. Also you can welding iron on both sides to prevent horizontal movement if it is necessary.

See below size, weight and drawing.